How many methods of refractory brick masonry in the mold casting bottom plate?

There are two methods on the masonry of refractory bricks in the mold casting bottom plate.

(1) Dry laying method.

The brick interface does not smear the mud in the liquid steel pipe, reducing the water, which is very beneficial to the quality of the steel ingot. However, for the quality of brick use, the technical quality of the masonry operators is strict, and the operation must be careful.

(2) Wet masonry method.

The brick interface is smeared with refractory mud to prevent steel breakout from the seam.

During the operation, it is necessary to pay attention to the fact that the mud cannot run into the working surface of the liquid steel pipe, otherwise the inclusions in the steel ingot will increase.

Notice: The bricks in the text, unless otherwise specified, refer to refractory bricks.

Tags: refractory brick, masonry, mold casting,

Inquiry

If you want to learn more about our Refractory Products, please feel free to fill the inquiry form below.
We will get in touch with you ASAP!

Product Inquiry,please

Contact us!

10th & 11th Floors, No.6 Building, CCEC Port, Daxue Road, Erqi District, ZhengZhou 450000, Henan, China

Copyright @ Zengzhou Rongsheng Kiln Refractory Co., Ltd. All Rights Reserved | Site Map | ExportBureau profile

Inquiry
E-mail